This
copier has the capability to print to many types of media
located in any of the numerous paper sources equipped on each
model. The paper source settings in the print driver must
match those onboard the copier in order to successfully print.
For
instance, the driver is set by default to automatically choose
the drawer of the copier that best matches the job that is
output from the copier.
It
is possible to override these default settings, forcing the
copier to print the job exactly how you tell it. Manually
forcing a job to print to a specific tray and specific paper
type and size could result in the copier being unable to print
your job. For instance, if you tell the copier you want 11X17
extra thick (Thick 3) paper printed from drawer number one,
then the copier will hold that job as unable to print until
someone puts Thick 11X17 paper in drawer one and configures
the paper settings on the copier to match. This scenario could
result in someone deleting your job because it is interfering
with their own. To prevent this, make sure the paper size,
type, and source all match the settings on the copier, or
use the auto setting.
These
are the interfaces to manually pick a paper size, type, and
source. Start by choosing "Paper Settings for Each Tray".
Make each tray in the print dialog match that which is configured
on the copier.
After
you ensure these settings match those of which are on your
copier, click the "Restore Device Status" to update
the current configuration that is on the copier. Please note
that this could change from use to use if people make changes
at the copier.
In
order to print to the copier with the settings that are currently
enabled at the device, simply choose a "Paper Tray"
and the driver will automatically set the paper type to what
is currently in the copier.
It
is possible to contradict these settings by manually setting
the "Paper Setting for Each Tray", however keep
in mind that the copier will most likely fail to print your
job, which will hold the job in the print Queue until the
failure condition is rectified. If you wish to contradict
the settings, please use "Password / Secure Print"
in order to store the job until you get to the device and
make the paper trays match the settings of the job.
|